Love Notes

Merry Christmas eve everyone! Thanks for stopping by. I have another sneak peak into the new catalog for you using the brand new stamp set, Sealed with Love.

Supply List:

Stamps: Sealed with Love

Ink: Versamark; Real Red

Paper: Whisper White; Real Red; Sending Love DSP Stack; Glassine Sheets

Embellishments: White Embossing Powder; 3/8” Silver Glitter Ribbon

Tools: Heat Gun; Embossing Buddy; Tear n Tape; Fast Fuse; Love Notes Framelits; Big Shot

Directions:

For the card base, cut Whisper White 8 ½”x 5 ½” and score at 4 ¼”. Then cut a piece of the Sending Love DSP 4” x 5 ¼” and apply strips of Silver Glitter Ribbon to the DSP at a diagonal using Tear n Tape. Trim the edges flush with the DSP then adhere panel to the card base using Fast Fuse. Next, cut a piece of Real Red cardstock 2 ¼” x 3” and a piece of Whisper White 2” x 2 ¾” and stamp the border from the Sealed with Love stamp set using Real Red ink on both the top and bottom of the paper. Adhere this to the Real Red piece and using Dimensionals, adhere this over the silver Glitter Ribbon. Prep a scrap piece of Real Red cardstock with the Embossing Buddy and stamp the sentiment “Love Note” from the stamp set using Versamark ink and coat with White embossing powder and heat until melted. Cut out using the coordinating framelit and Big Shot. Cut out the envelope shape framelit from the Glassine sheet and fold on score lines to form the envelope and place the “Love Notes” into the envelope and adhere in between the stamped border.

I hope you enjoyed this card. Let me know your thoughts in the comment below. I wish you all a Merry and blessed Christmas.

Happy Stamping,

Katrina

Product List

Sealed With Love Photopolymer Bundle

[144705]

Sealed With Love Photopolymer Stamp Set

[142815]

Real Red Classic Stampin' Pad

[126949]

Versamark Pad

[102283]

Whisper White 8-1/2" X 11" Card Stock

[100730]

Real Red 8-1/2" X 11" Card Stock

[102482]

Sending Love Designer Series Paper Stack

[142733]

Glassine Sheets

[138348]

3/8" (1 Cm) Glitter Ribbon Combo Pack

[142015]

White Stampin' Emboss Powder

[109132]

Heat Tool

[129053]

Embossing Buddy

[103083]

Tear & Tape Adhesive

[138995]

Fast Fuse Adhesive

[129026]

Fast Fuse Adhesive

[129026]

Big Shot

[143263]

Love Notes Framelits Dies

[142752]

Balloon Adventures

Hey guys! Thanks for stopping by. Today, I am using the brand new set, Balloon Adventures which is part of an entire suite of product. Awesome product at that...just too cute for words really. I decided to use this set because today just so happens to be my birthday. And to celebrate with you, I am hosting a little give away here on my blog. All you have to do to gain entry into the drawing is leave a comment below! Easy huh? I am giving away a set of the brand new Party Animal Embellishments! I added them to the product links below. They are part of the Balloon Adventure Suite and they are just so cute. I heard another demo refer to them as card jewelry and that is so true, that is exactly what they are. I just love them!

Measurements Pacific Point cut 8 1/2" x 5 1/2" scored and folded at 4 1/4" and 2 1/4"x 3 1/4"

Whisper White cut 5 1/4" x 4" and 2" x 3" and scrap for the sentiment

Party Animal DSP cut 3 3/4" x 2"

Directions: Begin by adhering the DSP to the bottom of the larger Whisper White panel using Fast Fuse. Then wrap the Taffeta ribbon around this piece and tie a bow to the left. Then adhere the entire panel down to the Pacific Point card base. Using the Balloon Bouquet punch, punch an Emerald Envy, Crushed Curry and Pacific Point balloon. Add "shine" with the White chalk marker. Next, stamp the strings onto the smaller Whisper White piece and adhere the balloons, I adhered the Emerald Envy and the Crushed Curry balloons down flat with Fast Fuse and added a Stampin' Dimensional to the Pacific Point balloon. I then stamped the sentiment onto a piece of scrap Whisper White with Pacific Point ink and punched it out using the Duet Banner punch. and popped it up on a couple of  Dimensionals. I adhered this piece to the smaller Pacific Point piece using Fast Fuse then using Stampin' Dimensionals I added that to the center of the card base. 

Quick and easy. I hope you enjoyed today's card. And don't forget, to get an entry into the drawing for the card jewelry, leave a comment below and let me know what you think. Again, thanks so much for stopping by to hang out with me.I truly appreciate you.

Happy Stamping,

Katrina

\ Product List

Balloon Adventures Photopolymer Stamp Set

[142823]

Pacific Point 8-1/2" X 11" Card Stock

[111350]

Whisper White 8-1/2" X 11" Card Stock

[100730]

Crushed Curry 8-1/2" X 11" Card Stock

[131199]

Emerald Envy 8-1/2" X 11" Cardstock

[141415]

Party Animal Designer Series Paper

[142738]

Pacific Point Classic Stampin' Pad

[126951]

Ribbon Taffeta 1/8" (3.2 Mm) Emerald Envy

[142742]

White Stampin Chalk Marker

[132133]

Balloon Bouquet Punch

[140609]

Duet Banner Punch

[141483]

Fast Fuse Adhesive

[129026]

Stampin' Dimensionals

[104430]

Party Animal Embellishments

[142775]

The Winter Solstice and the Tin of Tags

Happy Tuesday everyone. Can you believe it's almost Christmas? And tomorrow kicks off the official 1st day of winter, known as the Winter Solstice; which means tomorrow is the shortest day of the year in terms of sunlight; which means after tomorrow, we will begin to gain daylight rather than lose it! (insert happy face)

Today, I would like to share a card with you in honor of the Winter Solstice. It uses one of my favorite sets from the Holiday Catalog, Tin of Tags. I just love the versatility of this set. Although it was intended for making gift tags, is certainly steps out into the card making world very easily.

I started with a card base from Whisper White cut standard at 8 1/2" x 5 1/2", scored and folded at 4 1/4", I then cut a piece of Marina Mist cardstock 5 1/4" x 4" and a piece of Whisper White 5 1/8" x 3 7/8"  I secured the piece of Whisper White to my desk with some old Washi and layed the circles mask from the Seasonal Decorative Masks over it also using Washi (both the stamp set and the masks are currently on the End of Year Closeout!!) Then, using a clean sponge dauber, I applied the retired Dazzling Details glitter glue over the mask (any clear glitter glue will work for this) this created a "snowy" look. I tried to capture the beauty in the photos but just couldn't ...this is the best I could do. I removed the mask and allowed the glue to dry. Once dry, I stamped the snowflake and sentiment, both from the Tin of Tags stamp set, in Marina Mist ink. I then layered it onto the Marina Mist cardstock piece and finally layered it onto the card base using Fast Fuse.

I hope you enjoyed my Winter Solstice card. Please feel free to leave a comment and let me know your thoughts. In the meantime, I wish you all a wonderful day.
Happy Stamping,
Katrina
Product List

Tin Of Tags Photopolymer Stamp Set

[142180]

Whisper White 8-1/2" X 11" Card Stock

[100730]

Marina Mist 8-1/2" X 11" Card Stock

[119682]

Seasonal Decorative Masks

[141848]

Dazzling Details

[124117]

Marina Mist Classic Stampin' Pad

[126962]

Sponge Daubers

[133773]

Fast Fuse Adhesive

[129026]

Big On Birthdays

Happy Saturday! Wow, it sure is brutally cold! We are into a deep freeze here in NYS but we're supposed to warm up this weekend. Current temps are those we usually see at the end of January, early February. Brrrr! Any way, I have another sneak peak into the new catalog for you. It's the brand new stamp set, Big on Birthdays. This set is awesome. The stamps are larger than life! Really, the stamp that I uses on this cars is the size of the palm of my hand!

I actually made this card for my best friend's birthday. She happens to be 2 days older than me. We met in nursing school many years ago and we have remained the best of friends ever since. I love her dearly and plan to get this out in the mail right off so she gets it in time. So, for the instructions on this one:

I began with a Soft Suede card base cute 5 1/2" x 8 1/2" scored and folded at 4 1/4"

I cut a piece of Crumb Cake cardstock 1 3/4" x 5 1/2" and ran it through the Big Shot with the Petal Burst Embossing Folder

I then ran a piece of Very Vanilla through the Big Shot with the "So Detailed" Thinlit.

Finally, using the marker technique, I inked up the stamp, I uses Flirty Flamingo on the flowers from the 2016-2018 In-Color Stampin' Write Markers, Mint Macaron from the 2015-2017 In-Color Stampin' Write Markers and the Happy Birthday with the Soft Suede marker from the Neutral collection. I cut that piece down to 2 1/8" x 41/4" and punched the corners using a retired corner punch. Finally, I adhered everything down to the front of the card.I just love the new die and this stamp set is a must have.

 I hope you enjoyed today's card. I would love to hear your thoughts so please leave a comment below. And, if you haven't already, be sure to sign up for my newsletter. It's real easy, At the top of the right side bar, there is a sign up, when you do. you will get a tutorial delivered to your inbox and in the next few days, I will be sending all of my subscribers 4 more tutorials, You won't want to miss out on this so go ahead and subscribe.

Happy Stamping!

Katrina

Product List

Big On Birthdays Photopolymer Stamp Set

[142877]

Soft Suede 8-1/2" X 11" Card Stock

[115318]

Crumb Cake 8-1/2" X 11" Card Stock

[120953]

Very Vanilla 8-1/2" X 11" Card Stock

[101650]

So Detailed Thinlits Dies

[142751]

2015-2017 In Color Stampin' Write Markers

[138333]

Neutrals Stampin' Write Markers

[131261]

2016-2018 In Color Stampin' Write Markers

[141393]

Petal Burst Textured Impressions Embossing Folder

[141493]

Big Shot

[143263]

Big Shot Die Brush

[140603]

Precision Base Plate

[139684]

Fast Fuse Adhesive

[129026]