November 1, 2018

Many Blessings

Good Morning and welcome to my blog! I have a fun Fall card to share with you featuring the Many Blessings stamp set from the Holiday Catalog. This is the time of year we begin to focus on our many blessings, so I thought I would share this cute card and it's instructions with you. And of course it uses one of my all time favorites....Buffalo Check stamp! (swoon)

So, here it is:
Many Blessings
All images © 1990-2017 Stampin’ Up!®


Supplies:
  • Stamp SetsMany Blessings (147775); Buffalo Check (147794)
  • Card Stock – Call me Clover (146969); thick Whisper White (140272); Pineapple Punch
  • Stamp Pads –Memento  Tuxedo Black (132708); Call Me Clover (147139)
  • Misc. – Layering Circle Framelits (141705) Blends-Calypso Coral combo (144045) Crumb Cake combo (144601) Granny Apple Green combo (147274) Pineapple Punch (147280) Pumpkin Pie (144599) Bronze (144607) Dimensionals ( 104430) Fine Tip Glue Pen (138309) Stamparatus 146276
Measurements:  
  • Call me Clover:          5 ½” x 4 ¼”  and 3 ¼” square
  • Thick Whisper White :8” x 5 ¼” 1” x 3”  (banner)
  • Scraps for flowerpot
Instructions:
  1. Score and fold Whisper White cardstock at 4”.
  2. Cut circle with the Bigshot using the layering circles second largest circle. Cut circle frame from the 3 ¼” square by cutting the same size circle from the center, then place the largest layering circle framelit around the opening and run it through the Big Shot.
  3. Stamp the Buffalo Check background stamp on the front of the card in Pineapple Punch. Be sure to open the card so you don’t stamp the inside through the circle.
  4. Place the card on the Stamperatus and place the leaf laurel stamp from Many Blessings around the opening. Pick up the stamp with your Stamperatus plate. Now fold the card backwards and reposition in the correct place to stamp the leaves using All me Clover.
  5. Position the pumpkin stamp and stamp using Memento Tuxedo Black ink. Stamp a mask on a sticky note and cut out. Use this to mask the pumpkins while you stamp the flowers from the flower pot around the pumpkins.
  6. Color all these stamps using the Stampin Blends markers. Important: Do not leave your card folded while coloring with the blends as the color will bleed through.
  7. Glue the Call me Clover Frame around the circle on the front of the card.
  8. Stamp Many Blessings on banner and dovetail one end. Adhere with dimensional to left side of card.
  9. Stamp and fussy cut the flower pot. Color with Blends. Adhere to banner.
  10. Adhere the card to the 5 ½” x 4 ¼” Call me Clover layer. 

And of course I must remind you that the Snowflake Showcase suite of product is officially live and available for customer purchase. That suite of product falls into the category of just plain stunning! It truly is a wow producing suite. It is while supplies last, so if you are interested in this set, do NOT wait too long. You can grab the flyer here.
In the meantime, happy stamping,







Product List

October 31, 2018

Happy Halloween!

Good Morning and Happy Halloween!  I usually post on Tuesdays but I decided to wait until this morning so I could wish you a Happy Halloween proper like.... and share one more fun Halloween card that is sure to make your scariest ghosts and goblins smile!

Cauldron Bubble Halloween Card

All images © 1990-2018 Stampin’ Up!®

Supplies:
  • Stamp SetCauldron Bubble Bundle (149930-wood or 149931-clear) save 10%! or Cauldron Bubble stamp set (147713-wood or 147710-clear)
  • Card Stock (CS) – Pumpkin Pie (105117), Gorgeous Grape (146987), Basic Black (121045), Whisper White (100730)
  • Stamp Pads – Soft Suede (147115), Gorgeous Grape (147099), Smokey Slate (147113)
  • Misc. – Cauldron Framelit Dies (147914), Toil & Trouble DSP (147531), light Soft Suede Stampin’ Blend (146874), dark Daffodil Delight Stampin’ Blend (144585), light Highland Heather Stampin’ Blend (146881), Color Lifter Stampin’ Blend (144608), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Multipurpose Liquid Glue (110755), Multipurpose Adhesive Sheets (144106), Bone Folder (102300), Paper Snips (103579), Stampin’ Trimmer (126889), Big Shot (143263), Magnetic Platform (130658) makes it easy to line up the dies

Measurements:  
  • Pumpkin Pie CS: 4-1/4” x 11”, then scored in half at 5-1/2”
  • Gorgeous Grape CS: 5-3/8” x 4-1/8” & 2-7/8” x 4-1/8”
  • Whisper White CS: 2-3/4” x 3-3/4” & 5-1/4” x 4” for the inside & scrap for ghost
  • Basic Black CS: approx. 2” x 2“ for spider web
  • Toil & Trouble DSP: 2-1/4” x 4” & 1/2” x 4
  • Toil & Trouble DSP:   to die cut Witch, Cauldron & Cat (and to fussy cut frog)
Instructions:
  1. Using the Stampin’ Trimmer, cut 3” off of the long side of the card base (this gives you a 3” x 4-1/4” piece).
  2. Adhere the 2-7/8” x 4-1/8” Gorgeous Grape CS over the 3” x 4-1/4” Pumpkin Pie CS.
  3. Adhere the 2-3/4” x 3-3/4” Whisper White CS over the 5-3/8” x 4-18” Gorgeous Grape.
  4. Adhere the 5-3/8” x 4-1/8” Gorgeous Grape CS to the inside of the card base.
  5. Stamp the sentiment in Gorgeous Grape ink onto the 5-1/4” x 4” Whisper White CS.
  6. Stamp the broom in Soft Suede ink onto the 5-1/4” x 4” Whisper White CS.
  7. Color the broom with the light Soft Suede Stampin’ Blend & dark Daffodil Delight Stampin’ Blend.
  8. Stamp the ghost in Smokey Slate ink onto the scrap of Whisper White CS.
  9. Color the ghost with the light Highland Heather Stampin’ Blend and Color Lifter Stampin’ Blend.
  10. Adhere the ½” x 4” strip of DSP to the right side of 5-14” x 4” Whisper White CS.
  11. Adhere the 5-1/4” x 4” Whisper White CS over the 5-3/8” x 4-1/8” Gorgeous Grape
  12. Burnish the fold in the card base using a Bone Folder.
  13. Adhere the 2-1/4” x 4” Toil & Trouble DSP to the card front.
  14. Adhere the left half of the 3” x 4-14” Pumpkin Pie CS to the card front.
  15. Use the big shot to die cut the Witch, Cauldron & Cat from the Toil & Trouble DSP (or stamp and color them and die cut them out).
  16. Use the big shot to die cut the ghost.
  17. Adhere adhesive sheets to Basic Black CS.
  18. Use the big shot to die cut the web from the Basic Black CS.
  19. Adhere the ghost above the broom and cat to the right of broom on inside of card.
  20. Adhere the spider web in the upper right corner of Whisper White card front.
  21. Adhere the Witch and the Cauldron to the front of the card using dimensionals.
  22. Fussy cut the frog and adhere to the front of the card using a mini dimensional.


I hope you enjoyed today's share. I wish you all a very Happy and safe Halloween full of treats and no tricks lol...(in my scariest witches laugh).heeheeheee!


October 28, 2018

Snowflake Showcase Blog Hop


Hello and welcome to my blog! I am so glad you are able to join us today for our Snowflake Showcase Blog Hop! You are going to LOVE all of the amazing ideas and inspiration you are going to receive along the way. You maybe just getting starter here, at my blog, Katrina's Kreative Heart, or you may have just arrived from the person previous to me in the list. Either way, if at any time you get off track, the full light up  is below and will help you move along from blog to blog so you won't miss any of the great projects along the way. Again, you are currently visiting my blog, Katrina's Kreative Heart. 

I just absolutely LOVE this gorgeous collection of snowflakes and flowers. Stampin' Up! has absolutely outdone themselves on this suite of product, right down to the Velveteen paper!


For this card, I used a standard card base of Merry Merlot cardstock cut 85" x 5.5"  and I cut the large snowflake in the Snowfall die collection from the White Velveteen paper and 2 of the snowflake flourish, one from Sparkle Glimmer paper and one from the Joyous Noel Glimmer paper and layered them onto the card front with the large snowflake on the top with a Stampin' Dimensional. I then stamped the sentiment onto a piece of scrap Whisper White cardstock in Merry Merlot ink and trimmed it to approximately .75" x 4" and bannered each end with the Triple Banner punch and added it to the center of the card with Stampin' Dimensionals. 


Thanks so much for taking part in our blog hop, there are so many amazing ideas and inspiration you won't want to miss, so remember, you are currently on my blog, Katrina's Kreative Heart, so be sure to check the line up below and follow the links to the next blog in line. 

Happy Stamping,




Product List

October 26, 2018

Craft Fair Idea - Spirited Snowmen Treat Holder

Hello, good morning and welcome to my blog! Today, I want to share another, quick and easy craft fair sales item idea with you using our Lustrous White Mini Gable Boxes. I love these boxes because they're not only adorable, they are quite handy for treats and small gifts. 

So to make this perfect for a Christmas Bizarre or Craft Fair, I stamped both sides of the Gable Box, while it was still in the flat fold position with the Buffalo Check stamp and Pool Party ink. I then unfolded the box and filled it with treats (I had some pretty green foil wrapped caramels).  
Then, I stamped the sweet little snowman from the Spirited Snowmen stamp set onto Whisper White cardstock using Memento Tuxedo Black ink and colored him in with my Stampin' Blends markers. I used the light Pool Party marker to outline around his snow body, I colored his hat with the dark Real Red and the dark Granny Apple Green. I did his scarf and boots in the same dark Granny Apple Green and his stick arms and legs with the dark Crumb Cake and his carrot nose was done in the dark Pumpkin Pie and his buttons are in the dark Real Red. To finish him off, I used Clear Wink of Stella all over his face and body to make him sparkle like snow. 
I then punched him out with the 2 1/4 Circle Punch and die cut a scalloped circle from a piece of Granny Apple Green cardstock using the Layering Circles Framelit Dies and adhered these together with a little Snail adhesive and I attached it to the front of the treat box using a couple of Stampin' Dimensionals. 
I hope you enjoyed today's project. Feel free to leave a comment and let me know your thoughts. I would love to hear them. In the meantime, Happy Stamping and have a wonderful weekend and be sure to check back on Sunday as I will be hopping along with many other demonstrators, featuring the gorgeous, Snowflake Showcase, which goes live for customers Thursday, November 1st!


Product List

October 23, 2018

Happy Birthday Stampin’ Up! Flash Sale

Good morning friends! I am so excited to let you know, Today, Stampin’ Up! is celebrating their birthday and having a great 24 hour flash sale on select stamps! Stampin’ Up! is rewarding us for their 30th birthday, wohoo!  So, grab your party hats and join in the fun and savings.
Here are the sets you can pick up at a 15% discount




So, hurry over to my on line store and pick up your favorite sets because this sale will be gone in a flash!
If you would like the downloadable PDF, grab it here 
Happy Stamping my friends,
Katrina

01 09 10 Code line 7 9 is for loading jQuery library. Remove this line if you’ve already loaded it somewhere else in your blog. Hint: If your blog has an image slider, carousel or something with fading effect running, chances are it is powered by jQuery. If this widget doesn’t work, the first thing you want to do is comment out or remove this line. To use your own button, replace the URL in line 3 with the direct link URL to the image. Make sure to keep the quotes. To reposition the button, replace